Low Power 5L 10L Water Liquid Drink Plastic Bottle Filling Machine
With 600 BPH
--- Introduction---
The plastic bottle filling mchine , It adopts PLC and touch screen
automatic control, and has the advantages of accurate filling,
advanced structure, stable operation, low noise, large adjustment
range and fast filling speed.
The machine was design and manufactured by Shanghai Npack
Automation equipment co.,ltd, especial for liquid from thin viscous
to high density liquid, such as water, oil, lotion, cream, Jam,
sauce, honey, ketchup and so on. It is mostly used in the industry
of chemicals, foodstuff and pharmaceuticals.
--- Feature---
1. 304 Stainless steel construction , and the liquid contact parts
are 316L stainless steel.it is based on you.
2. Schneider PLC and touch screen control for you
3. Servo motor Driven, one servo motor drive one piston, high speed
and high accuracy.
4. No bottle ,no fill, automatic alarm for the warning.
5. The filling blocked nozzles are anti drops, silk, and auto cut
viscous liquid
6. Easy to maintain, no special tools are required.
7. Diving nozzles for bottom up filling of foaming products if need
8. Bottle mouth can be located if need
--- Inside Details Introduction---
Washing Part
1. Main shaft turned 180degree under gear wheel.
2. Let bottle’s mouth face to land, jetting water into bottle,
after a few seconds, the main shaft will be back, than finishing
the washing.
Filling Part
1. Washing finished bottle is conveyed into filling position ,
cylinder push and hold the plate which can hitch bottles .
2. the time lasting of filling can be adjusted .
Capping machine
1. The working is intermission when running.
2. There are six positions for capping, and have 1 capping head,
can automatically cappin.
---Technical Paraments---
| Type | 4-4-1 6-6-1 |
| Applicable bottle size | PET bottle |
| Diameter | ф150-195 mm |
| Bottle height | 230～360mm |
| Rated Capacity | 400-500BPH@5L | 500-800 BPH@5L |
| Cap Style | Plastic Screw Cap 40~55mm Neck for PET Small Bottles |
| Volume | 5.0-10Liters |
| Timing Type | Transducer |
| Filling accuracy | ±0.5% |
| Pressure of washing | 0.25Mpa | 0.3Mpa |
| Pressure of filling | 0.15Mpa | 0.2Mpa |
| Main machine Power | 1KW | 1.6KW |
| Overall size | 6200*1000*2100mm | 7200*1000*2100mm |
| Weight | 1.5Kgs | 2Kgs |
